Libmonster ID: RU-17116
Автор(ы) публикации: Academician Leopold LEONTYEV →

by Academician Leopold LEONTYEV, Vladislav PONOMARYOV, Cand. Sc. (Chem.), Institute of Metallurgy, RAS Ural Branch (Yekaterinburg)

Knowledge accumulated for many years by specialists of the Institute of Metallurgy, RAS Ural Branch, has become a scientific base for modern technologies of high dispersible metallic powders. Besides, studies, conducted jointly by the laboratory of powder, composite and nanomaterials of the above institute and the High-Dispersible Metallic Powders company established on the basis of the said laboratory, open up prospects for further development and application of submicron, nanodimensional and nanostructural powders.

стр. 13

Computer model of condensation of copper nanoparticles from gas phase (32,000 atoms): A-T = 2,300 K; B-T = 300 K.

HIGH-DISPERSIBLE POWDERS

In late 1950s, concurrently with scientific centers of the USA and Japan, our institute started research headed by Irina Frishberg, Dr. Sc. (Tech.), which resulted in the creation of the theoretical basis of metallic powders produced by evaporation and condensation. The technology and equipment for production of high- and nano-dispersible powders by the gas-phase method were also worked out at our institute.

In 1991 one of the first innovation complexes appeared within the framework of the Russian Academy of Sciences, namely, ZAO High-Dispersible Metallic Powders (HMP) science and production enterprise, and our institute became its co-founder. This company launched unprecedented commercial production of metallic powders, anti-corrosion composites and anti-wear materials, which account for 90 percent of the national output of such products. Based on powders of different metals and alloys, more than 40 anti-corrosion and anti-wear materials were developed here as well as methods of their application such as a "cold" galvanizing method (i.e. without melting) and nanotechnology modifying friction surfaces. As a result, over 40 inventor's certificates and patents and 90 certificates of trademark registration were obtained. Resource-saving materials and production methods were tested and certified by leading research centers of the country and introduced into state and branch standards. At present they are widely used by more than 1,000 national enterprises in the industrial and transport construction, power engineering, and the oil and gas complex, while the number of buyers in the consumer market make up hundreds of thousands.

The HMP company is located in the Akademichesky innovation-technological center* established under our institute in 1998. Its production capacity ensures an annual output of up to 200 t of zink dust and up to 30 t of copper and bronze powders each. At the 34th International Salon of Inventions, New Technology and Goods known as Geneva 2006 two joint studies of our institute and the HMP company "The Metal Evaporation Method and Its Realization" and "Metalclad Concentrate for Anti-Corrosion Protection of Metal" were awarded gold medals.

Creative cooperation of the HMP company and the institute's laboratory transformed now into the laboratory of powder, composite and nano-materials under the command of Boris Gelchinsky, Dr. Sc. (Phys. & Math.), opens up prospects of search directed at obtaining and application of submicron, nanodimensional and nano-structural materials.

SUBMICRON MATERIALS

It should be stressed that zink and copper powders and those made from their alloys present a major portion of all powders produced from nonferrous metals. Copper powders offered in the world market have an average particle size in the range of 1-50 urn and a specific surface area within the range of 0.25-1.2 m2/g. They are used in the production of microelectronic


*  See: L.   Leontyev et al.,  "Akademichesky Center of Innovative Technologies", Science in Russia, No. 2. 2003.—Ed.

стр. 14

components, special carbon electrodes (in electrochemistry) and other items. It is important to note that the HMP company produces today submicron powders obtained from copper and its alloys with an average particle size from 0.01 to 1.0 urn by the inert gas evaporation-condensation method.

Moreover, our laboratory carried out testing of nanostructural transformations of the steel surface in the presence of submicron powders of copper alloys under severe thermomechanical impacts. As a result it has been established that when a lubricant composition containing submicron powder of copper alloy is applied between contact steel surfaces, there arise reactions, which lead to nanostructural transformations of these external steel layers. The isolated copper atoms possess an increased energy and, therefore, actively interact with the underlying metal penetrating into its external layers. As a result, micromodification of the metal surface takes place, and a nanostructural coating appears, which has an unusual property, i.e. a combination of high hardness and increased plasticity. The former is characterized by deformed parts of the upper area with a twisted (the so-called "rotary") nanostructure of up to 25 urn depth. This phenomenon is usually observed in structures formed under high-temperature phase transformations. They were not observed in tests without a copper alloy, which is a proof of interaction between availability of a copper alloy nanopowder and emergence of "rotary" compound particles, which confirm high plasticity of the layer.

It should be noted that the formed nanocrystal copper-containing layer acts as a specific microcoating, which protects contact surfaces from friction. As the said nanostructural upper layer fails gradually under thermomechanical loads, the copper alloy powder ought to be constantly applied in the contact zone. Concentration of this powder can be calculated on the basis of specifics of a metal base layer* and equipment design.

All the above said opens up prospects of efficient utilization of submicron powders of copper alloys for extension of service life of machinery and equipment.

METALLIC NANOPARTICLES FROM MELTING

It is well-known that a part of metallic powder produced by the evaporation-condensation method falls in the nanodimensional range. Therefore, there is a possibility of obtaining the maximum output of necessary nanodimensional particles by varying operational parameters of the process, managing flows of working medium in a special way in the used equipment, and introducing structural changes in the equipment. Thus, specialists of our institute headed by Boris Gelchinsky are engaged in the development of methods for multi-scale computer modeling to form metallic nanoparticles from melting. It ensures not only modeling of their sizes from the atomic to the macrolevel, but also the possibility of using the search results obtained at one stage as source data to study the scaling process at the next stage. The first employed method is atomic and microscopic modeling of metallic nanocluster formation processes (the method of molecular dynamics, periodic boundary conditions, the system of 32,000 atoms), and the second method is macroscopic modeling.

Dispersibility of the products of pyrolysis versus degree of decomposition.

THERMAL DECOMPOSITION OF OXALATES

The system of obtaining Fe, Ni, Co and Cu nano-powders by the method of thermal decomposition of chemical compounds, namely, oxalates (salts with a rather low decomposition temperature) was created by Anna Meilakh, Dr. Sc. (Tech.), in the course of studies at the institute's laboratory in late 1980s. The former three nanopowders are isomorphous (i.e. are structured identically), which ensures obtaining of alloyed powders, while the products of their decomposition (H2O and CO2) are nontoxic. The suggested method is highly productive, and particles of nanopowders, formed by topochemical reaction (it takes place in a solid phase on the boundary line of a source substance), have substantial crystal lattice distortions, which guarantees their   high   activity   in   different   physico-chemical


* Base layer is a designation of a source material whose surface is subjected to different kinds of treatment, which results in the formation of layers with new properties or a film of other material.—Ed.

стр. 15

A, B-samples of nanopowders of an approximate size of 80 nm. Obtained in one of the variants of the pilot unit.

processes, for example, catalytic activity in hydrogen reactions.

The specific surface of products obtained in the course of a chemical process of oxalate decomposition was determined experimentally. It increases monotonously with an increase of the degree of their decomposition to high values (90-95 percent) and decreases abruptly upon the complete termination of this process due to caking of small particles of pure metals. The average sizes of reduced metal particles calculated by values of a specific surface are within a range of 70-85 nm, while the oxygen content in these powders makes up 0.5-1.0 percent.

To increase dispersibility (a value, characterizing the size of suspended particles in appropriate systems.— Ed.) of nanopowders, 0.5 percent MgO additive was used in the form of magnesium nitrate solution in ethanol, applied for wetting the tested salts before reduction. The obtained metal powders had a specific surface typical of maximum dispersible products of pyrolysis.

Also determined were conditions of getting nanopowders of Ni-Cu alloys from coprecipitated* oxalates as well as those of binary and treble alloys of Fe-Co-Ni** system. The X-ray examination showed that such powders obtained at the temperature of 350-450oC— during I   hour had a single-phase structure. Concentration dependence of a specific surface of binary alloy powders has a maximum value under an equal ratio of components. But the dispersibility of treble alloys depends on the composition, temperature and duration of oxalate pyrolysis and ranges from 10 to 70 m2/g.

It is not accidental that the nanopowders created by our specialists are used as additives to the most technically important for appropriate metallurgy commercial iron, nickel and copper powders to activate their caking.

Besides, we have also worked out constructional powder steel with a new composite structure: the latter consists of large spherical particles of iron powder connected on boundaries by fine-grain layers based on nanopowders of Ni-Cu alloys, diffusion-saturated with iron and dispersion-reinforced with ZrO2 inclusions. The tests proved that these novelties exceeded in strength and plasticity 2-4 times those similar in composition but obtained from a mixture of conventional powders. Moreover, addition of Ni and Cu nanopowders in combination with carbon made it possible to get steel powder X17H2 (contains 17 percent of chrome and 2 percent of hydrogen) with corrosion resistance and mechanical properties not worse than those of conventional cast steel of the same composition.

The experience accumulated at our institute in the development of instruments for technological processes and organization of production of new materials conditioned creation of a research team, consisting of our staff members and specialists of the Institute of High-Temperature Electrochemistry of the RAS Ural Branch (Yekaterinburg) and representatives of the HMP company, all of them engaged since 2008 in the work on the


* Coprecipitation is a partial transfer of a solution (melt, vapor) component, present in small concentrations of the mierocomponent, to a solid phase formed in the given system already by another component, which in its turn, is present in considerably higher concentrations.—Ed.

** Binary or treble nature of the alloy of this system depends on the initial ratio.—Ed.

стр. 16

project of the Russian Agency for Science "Production Technology of Aglomerated Nanoerystalline Tantalum Powders of Condenser Type Using the Electrochemical Process" (Federal target program) headed by Academician Leopold Leontyev.

Singularity of the task lies in obtaining a tantalum powder not on the surface of a cathode or inside a diffusion layer, but in the whole volume of the electrolysis bath. The melted compound of different salts in the atmosphere of argon serves as an electrolyte in this case. Thus, by adjusting density of the current and the temperature, we can get powders of different form (equiax-ial (cubic type), moustache, thin plates, etc.) of the size from units to thousands of nanometers. Condensers made from such powders (given designed electrical parameters) have sizes by an order less than those from powders of fragmentary (shapeless) type. The suggested method provides the basis for a totally new technology of metal nanopowders, which is based on fundamental theoretical works of the Ural school of electrochemical engineers. Compact metal is used as a consumable material, and besides, additional cleaning of the latter from admixtures takes place during electrolysis.

As a result of implementation of the said project, a pilot model of production equipment for getting aglomerated (or compacted) nanocrystalline tantalum powders will be developed by the end of 2010.

COMPLEX COMPOSITES WITH A NANOSTRUCTURAL INTERMEDIATE LAYER

In the 2000s a group of experts headed by Eduard Pas-tukhov, RAS Corresponding Member, and Yuri Kon-tsevoi, Cand. Sc. (Tech.), carried out experiments to get a lamellar composite of the steel-aluminum system with a nanostructural intermediate layer to be used as anti-corrosion, anti-friction and conducting materials with increased mechanical properties. Such composite was prepared by the mechanochemical and thermal treatment according to the following outline: at first—combined rolling of aluminum powder and a steel non-porous strip with a single draft, followed by the thermal treatment of a bimetal strip, heating to the temperature of 680-700 °C, then cooling in water and rolling in an asymmetric deformation zone. As a result, an intermediate layer of 15-20 µm thickness was formed. Its structure was studied by an electron microscope. It was found that a dominant size of grains of the intermediate layer was 1 µm.

It is true that its wide application is checked by a brittle  intermetallic  intermediate  layer. As experience shows, this shortcoming can be eliminated most likely at the expense of formation of a submicrostructure in it, which ensures a phase transition of iron aluminides to the state of oversaturated solution of iron in aluminum.

NANOMATERIALS BASED ON TRANSITIONAL METAL OXIDES

Within the framework of the joint Russian-Israeli grants of the Russian Fund of Fundamental Research, our institute and the Institute of Physics of Metals of the RAS Ural Branch (Yekaterinburg) are carrying out work to get and study the structure and properties of compact nanocrystalline oxides obtained by methods of intensive plastic deformations: shift under pressure, shock action, and mechanical chemistry. There already exist nanomaterials based on CuO, LaMnO3, Mn3O4, Fe2O3 and a number of other oxides. At our laboratory specialists in statics and kinetics of processes headed by Anatoly Fishman, Dr. Sc. (Phys. & Math.), attempted to produce, by the mechanochemical process, nanodi-mensional manganese oxides with the definite structural characteristics and studied the impact of the treatment conditions on them. Both single-phase oxides and their compounds were subjected to this process in conditions of time variation of mechanical activation, composition of gas atmosphere, chemical composition of the substance (i.e. compound) under study, and the process parameters. As a result, it became possible to obtain nanocrystalline oxides by methods of intensive plastic deformations.

Thus, long before the "nanoboom" started, our institute studied (and is still studying) the impact of dispersion on end-use properties of materials. In some instances, possibilities of application of high-dis-persible and nanodimensional materials for practical purposes have been shown, and in the other cases changes of physicochemical and mechanical properties in the course of transition to submicro- and nanodi-mensions have been assessed, which is a valuable contribution to the development of the solid state theory.


© libmonster.ru

Постоянный адрес данной публикации:

https://libmonster.ru/m/articles/view/ULTRADISPERSIBLE-AND-NANODIMENSIONAL-POWDERS

Похожие публикации: LРоссия LWorld Y G


Публикатор:

Россия Онлайн → Контакты и другие материалы (статьи, фото, файлы и пр.)

Официальная страница автора на Либмонстре: https://libmonster.ru/Libmonster

Искать материалы публикатора в системах: Либмонстр (весь мир) • Google • Yandex

Постоянная ссылка для научных работ (для цитирования):

Academician Leopold LEONTYEV, ULTRADISPERSIBLE AND NANODIMENSIONAL POWDERS // Москва: Либмонстр Россия (LIBMONSTER.RU). Дата обновления: 19.08.2021. URL: https://libmonster.ru/m/articles/view/ULTRADISPERSIBLE-AND-NANODIMENSIONAL-POWDERS (дата обращения: 16.11.2026).

Найденный поисковым роботом источник:


Автор(ы) публикации - Academician Leopold LEONTYEV:

Academician Leopold LEONTYEV → другие работы, поиск: Либмонстр - Россия • Либмонстр - мир • Google • Yandex

Комментарии:



Рецензии авторов-профессионалов
Сортировка: 
Показывать по: 
 
  • Комментариев пока нет
Похожие темы
Публикатор
Россия Онлайн
Москва, Россия
457 просмотров → рейтинг
19.08.2021 (1915 дней(я) назад)
0 подписчиков
Рейтинг
0 голос(а,ов)
Похожие статьи
Бабушка и внук: границы взаимодействия
Каталог: Pedagogics 
5 часов(а) назад · от Тексты на болгарском (оригинал)
Глава 26. Многомерная конструкция человека. Формирование физического тела и энерготел ребенка до его рождения. Закон Иерархии в человеке.
Каталог: Философия 
5 часов(а) назад · от Валерий Панин
Золотая пальмовая ветвь 2026 Барбары Стрейзанд
Каталог: Arts 
12 часов(а) назад · от Тексты на болгарском (оригинал)
Фрустрация в учебе и ее преодоление
Каталог: Psychology 
13 часов(а) назад · от Тексты на болгарском (оригинал)
Мексиканский сериал как мировой феномен
Каталог: Sociology 
14 часов(а) назад · от Тексты на болгарском (оригинал)
Искусство, литература и кино о жизни бездомных
Каталог: Arts 
Модель Housing First для решения глобальной проблемы бездомности
Каталог: Sociology 
Глава 26. Многомерная конструкция человека. Формирование физического тела и энерготел ребенка до его рождения. Закон построения мира в человеке.
Каталог: Философия 
2 дней(я) назад · от Валерий Панин
Филантропия в культуре человека
Каталог: Sociology 
О современной организации труда, не по Тейлору
Каталог: Sociology 

Новые публикации:

Популярные у читателей:

Новинки из других стран:

LIBMONSTER.RU - Цифровая библиотека России

Создайте свою авторскую коллекцию статей, книг, авторских работ, биографий, фотодокументов, файлов. Сохраните навсегда своё авторское Наследие в цифровом виде. Нажмите сюда, чтобы зарегистрироваться в качестве автора.
Партнёры библиотеки
›
›
ULTRADISPERSIBLE AND NANODIMENSIONAL POWDERS
 

Контакты редакции
Чат авторов: RU LIVE: Мы в соцсетях:

О проекте · Новости · Реклама

Либмонстр Россия ® Все права защищены.
2014-2026, LIBMONSTER.RU - составная часть международной библиотечной сети Либмонстр (открыть карту)
Сохраняя наследие России


LIBMONSTER NETWORK ОДИН МИР - ОДНА БИБЛИОТЕКА

Россия Беларусь Украина Казахстан Молдова Таджикистан Эстония Россия-2 Беларусь-2
США-Великобритания Швеция Сербия

Создавайте и храните на Либмонстре свою авторскую коллекцию: статьи, книги, исследования. Либмонстр распространит Ваши труды по всему миру (через сеть филиалов, библиотеки-партнеры, поисковики, соцсети). Вы сможете делиться ссылкой на свой профиль с коллегами, учениками, читателями и другими заинтересованными лицами, чтобы ознакомить их со своим авторским наследием. После регистрации в Вашем распоряжении - более 100 инструментов для создания собственной авторской коллекции. Это бесплатно: так было, так есть и так будет всегда.

Скачать приложение для Android