Stainless steel kitchen cabinet manufacturer teaches you how to choose the right cabinet
China Stainless Steel Sink are the first choice for home improvement designers looking for a sophisticated lifestyle kitchen. Then face How do we choose a stainless steel sink manufacturer? Be aware that there are many places where households use stainless steel sinks, such as Stainless Steel Laundry Sink , stainless steel kitchen sinks, etc.
1. Measure the thickness of the stainless steel sink: a good stainless steel sink uses a relatively thick plate. Since the sink is edge treated, it is difficult to see the thickness at the same time. The easiest way is to gently press the surface of the sink. If you press it, it means the material is thin, of course, if you can borrow vernier calipers and micrometers, don't bother.
2. Weight of stainless steel sink: Stainless steel is a kind of iron alloy. The specific gravity of steel is 7.87. Nickel and chromium heavy metals are added internally. The proportion of these metals is greater than the proportion of steel, so the weight is relatively heavy (of course, the thickness of the plate must also be referred to). If it is counterfeit, inferior stainless steel, such as steel chrome, is light in weight.
3. Look at the stainless steel sink process: welding and integral molding. We have seen some famous brand remitts. The appearance is the same size, but the price is very different. There are material factors here, but there are also process costs. Of course, it can be said that the integrated stainless steel sink is definitely better than the welding method. First class sinks are usually produced by stamping. Of course, there are also low-end products in the brand name. Many welding methods are used. got it.
The difference between the one-piece molding and the welding method: the welding method, respectively stamping the groove surface and the groove body, joining the two by welding, and filling and polishing the welding surface, generally the welding appearance is not visible on the front surface. This production method is simple in process, low in production loss, and relatively low in cost. In a forming method, a water tank is formed by extruding a single sheet, which requires high processing equipment and a mold. Due to the high demands placed on the quality and ductility of the sheet in a single molded article, a 0.8-1 mm thick sheet is typically used for stamping and the entire mold and imported stamping equipment are used. can be completed. In the production of the forming method, the edges of the metal sheets are greatly cut, and the cost of the molds and equipment is high.
To learn more about kitchen and bathroom, then you can pay attention to the AFA Stainless Steel Kitchen Cabinet Manufacturers website is https://www.afastainlesskb.com